Wheel Centric Spacer (5x112/5x112) 1.25" Only Wheel Spacers

Add Wheel Clearance Without Changing Your Bolt Pattern

These 1.25" thick 5x112mm wheel spacers are designed for compatible 5x112mm hubs and wheels, including applications using Mercedes 5x112mm wheels.

Unlike a bolt-pattern conversion, this spacer keeps the same 5x112mm bolt pattern while adding 1.25" of spacing between the hub and wheel. This can help create additional clearance and change the wheel's position outward when properly matched to the vehicle and wheel setup.

Each spacer is CNC-machined from 6061-T6 billet aluminum and includes new wheel studs and lug nuts for installation.

Product Specifications

How It Works

Your vehicle uses a 5x112mm hub and your wheels use a 5x112mm bolt pattern.

The spacer simply adds 1.25" of spacing between the hub and wheel:

5x112mm Hub
⬇
1.25" Spacer
⬇
5x112mm Wheel

This does not change your bolt pattern. It simply moves the wheel outward by the thickness of the spacer.

Designed for Mercedes 5x112mm Wheels

These spacers are intended for compatible applications where a 5x112mm hub needs to accommodate a 5x112mm wheel, including select Mercedes setups.

Important: A matching bolt pattern alone does not guarantee fitment. Always verify the vehicle hub, wheel center bore, offset, backspacing, lug-seat design, brake clearance, and available fender/suspension clearance before ordering.

Premium 6061-T6 Billet Aluminum

Each spacer is CNC-machined from 6061-T6 billet aluminum for precise dimensions and durable construction.

The spacers are supplied with 14x1.5 studs and lug nuts, giving you the necessary hardware for the listed application.

⚠️ Check Factory Stud Clearance

Because these spacers are 1.25" thick, check the original factory hub studs before installation.

If factory studs extend beyond the spacer mounting surface and contact the back of the wheel, the wheel may not sit completely flush. The factory studs must be properly shortened when necessary to provide adequate clearance.

Never install or operate the vehicle if the wheel cannot sit completely flush against the spacer.

Before You Order

Please confirm:

✓ Your vehicle hub is 5x112mm
✓ Your wheels are 5x112mm
✓ Your hub and wheel center bores are compatible with the 66.5mm center bore
✓ Your setup uses the correct 14x1.5 hardware
✓ The 1.25" thickness works with your wheel offset
✓ You have adequate brake, suspension, and fender clearance
✓ Factory studs will not interfere with the back of the wheel